FAQ and General info

No we do not. Those trucks do not have Amber inside the DRL housing. It has a separate dedicated amber source. You would need aftermarket headlights or front end swap your truck to the new generation. 

99% of the time if your DRL’s are still white after installing the switchback kit, its because the ECM is calling for that function. Several things call for them to switchback to white: Remote starting, parked in a garage or shop (Low light conditions), or turning your headlight knob. We’ve also seen simple cases of something covering the light input sensor that is located on your dash. 

Make sure your headlight knob is in the AUTO position. Once you start the truck and backout of your garage, the light sensor will tell the ECM to turn the DRL’s Amber. 

There are 3 possibilities that can cause this: 

1. The relay has failed to activate on the Amber Switchback Kit and is covered under our standard warranty period. 

2. The wrong kit is installed on the truck. These trucks have dedicated kits and function differently. 

3. If you are using the Full time amber kit, the pick BCM module must be installed and the pink and green wires must be connected to the LCM pink and green wires, under the dash. 

This is completly normal for the canyon. This is the annimation lighting ramping up from 6V to 12V.

This is a classic sign that the relay has failed. Contact us for a replacement. 

We are always exploring new options and modifications. Most of the time that requires test vehicles to run the new product for a 6 month field test. 

We ship worldwide!

All products are backed by Venom’s 1 year free replacement warranty and supported by the best customer support around!

All returns must be made within 30 days of purchase and in new and unused condition and will be subject to a 10% restocking fee. Any damaged or modified equipment will not be returnable and will be shipped back to you.

If you have our Full Time Amber Kit that keeps your DRL’s amber at night, Instead of using pin 1 (white/yellow wire) on the pink connector like we do in the install video, you will use pin 10 (Solid yellow wire) on the same connector. This image is what it will look like when correct.

It is not compatible with any amber kit. The No Dim harness is strictly for White DRL’s only. 

Depending on the time of year, shipping companys get back logged and may delay shipments, especially around busy shopping holidays. We have no control over this and somethimes it does happen. If a package stops moving completely for 1 week, we can take action and get you a replacment out. 

gmc mods
silverado 1500 truck parts
0